LIST OF NATIONAL AND INTERNATIONAL STANDARDS
ACCEPTED IN THE ANZEx PRODUCT CERTIFICATION SCHEME

(see Annex C of MP87-1:2008)

Standards for explosion-protected electrical equipment

Standards issued by the Joint Standards Australia/Standards New Zealand Committee EL-014, Standards Australia Committee EL-023 and International Electrotechnical Commission Technical Committee TC31 Standards are accepted for use within the ANZEx Equipment Certification Scheme.

Standards for explosion-protected electrical equipment

Only the current issue or revision of a Standard, or the issue or revision immediately prior to the current, is to be used for the issue of ANZEx Certificates of Conformity except as given in Clause 3.3.1.3.1. Where a Standard is superseded or withdrawn, the Standard that replaces it shall be considered as the next edition for the purpose of this Paragraph. However, Restricted Type Test Certificates may be issued to demonstrate conformity to the current or any edition of a Standard meeting the requirements of Paragraph C.1. One example where it may be necessary to issue a Restricted Type Test Certificate to an old edition of a Standard may be the result of repair, overhaul or modification of Ex equipment under an Approved or Certified Ex Repair Workshop. Additional standards may be added from time to time.

Rulings

Standards Australia have issued Rulings based on IEC standards Interpretation Sheets (I-SH). At present there are 4 such rulings and they relate to:

  • AS/NZS 60079.0:2000 - application of thermal endurance test

  • AS/NZS 60079.0:2005 - application of thermal endurance test

  • AS/NZS 60079.0:2008 - application of thermal endurance test

  • AS/NZS 60079.29.10:2000 - fail criteria for the drop test

Please obtain copies of the rulings or consult with a participating ExCB if more information is required.

Search Certificate Database

Login Form

Shopping Cart Contents

 x 
Cart empty